Industrial Valve

Butterfly Valve

A butterfly valve is a type of flow control valve used in industrial applications to regulate the flow of fluids or gases. It consists of a circular disc or plate, which is positioned in the center of the valve body and rotates about a shaft perpendicular to the flow path. When the valve is open, the disc allows fluid or gas to pass through freely, and when it is closed, the disc blocks the flow.

Multiport Valve

A multiport valve is a valve commonly used in swimming pools, aquariums, and water treatment systems. It is a type of valve that has multiple ports, each of which is used for a specific function.

Angle Valve

An angle valve is a type of valve that is designed to be installed at a 90-degree angle to the pipeline or pipe it is connected to. This type of valve is commonly used in plumbing and HVAC systems to regulate the flow of liquids or gases. Angle valves typically have a quarter-turn or multi-turn handle or knob that is used to open or close the valve.

Solenoid Valve

A solenoid valve is an electromechanical device used to control the flow of fluid or gas through a system. It consists of a coil of wire (solenoid) wrapped around a ferromagnetic core and a valve mechanism. When an electric current is passed through the coil, it creates a magnetic field that pulls the valve mechanism, allowing the fluid or gas to flow through the valve. When the electric current is turned off, the magnetic field disappears, and the valve returns to its original position, stopping the flow of fluid or gas.

3- Way Valve

A 3-way valve is a type of valve that has three ports, typically labeled as the inlet, the outlet, and the common port. It can be used to divert flow between two different outlets or to mix two different streams of fluid or gas into a single outlet. In the diverting configuration, the valve is used to direct flow from the inlet port to one of the two outlet ports, while blocking the other. This configuration is commonly used in applications such as water distribution systems, where the valve can be used to control the flow of water between two different pipelines.

Piston Valve

A "piston valve" is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder.

4-Way Valve

A 4-way valve is a type of valve used to control the flow of fluid or gas in a system. As the name suggests, it has four ports, which allow it to switch the direction of flow between two separate pathways. In its simplest form, a 4-way valve has an input port, two output ports, and a drain port. The valve can be manually or automatically controlled to direct the flow of fluid or gas from the input port to one of the output ports, while the other output port is connected to the drain port.

Needle Valve

A needle valve is a type of valve used to precisely regulate the flow of a fluid in a pipeline. It is named for its needle-shaped plunger, which is threaded through a threaded seat to precisely control the opening and closing of a small orifice. Needle valves are commonly used in applications where precise flow control is required, such as in laboratories, chemical processing, and the oil and gas industry.

Pinch Valve

A pinch valve is a type of valve that controls the flow of fluid through a tube or pipe by pinching a section of the tubing or sleeve. The valve is usually made up of a housing or body, a flexible tube or sleeve, and some form of mechanism that can pinch the tube or sleeve to close off the flow of fluid.

Flow Regulating Valve

A flow regulating valve is a type of valve used in fluid control systems to control the rate of fluid flow through a pipeline or channel. It is designed to regulate the flow of fluid by adjusting the valve opening in response to changes in the flow rate or pressure of the fluid. The valve contains a movable part, such as a disc or a piston, that restricts or allows the flow of fluid. The position of the movable part is adjusted by an actuator, which can be mechanical, electrical, or pneumatic.

Diaphragm Solenoid Valve

Plug Valve

A plug valve is a type of quarter-turn valve that uses a cylindrical or tapered plug to control the flow of a fluid. The plug can be rotated within the valve body to open or close the flow passage. Plug valves are commonly used in industrial applications, such as oil and gas production, water treatment, and chemical processing, where they can handle a wide range of pressures and temperatures.

Slide Valve

Slide valves to control the flow of steam into and out of the cylinders. In the 20th century, slide valves were gradually superseded by piston valves, particularly in engines using superheated steam.

Y Type Valve

A Y Type Valve is a type of industrial valve that is designed with a "Y" shaped body. The valve has an inlet and two outlets that are angled in opposite directions, forming the shape of the letter Y. Y Type valves are commonly used in applications where a fluid needs to be diverted in two different directions. They are particularly useful in situations where the flow of the fluid needs to be controlled, such as in pipelines, chemical processing plants, and refineries.

Control Valve

A control valve is a device used to regulate the flow of fluids (such as gases, liquids, or slurries) through a piping system. It operates by adjusting the size of the flow passage within the valve, which in turn regulates the amount of fluid that passes through it. Control valves are used in a wide range of industries, including oil and gas, chemical, power generation, and water treatment. They are used to control various process variables, such as flow rate, pressure, temperature, and level.

Ball Valve

A ball valve is a type of valve that uses a hollow, perforated ball to control the flow of liquids or gases through a pipe or other passageway. The ball has a hole through the middle, known as the bore, that allows fluid to pass through when the bore is in line with the inlet and outlet ports of the valve. The ball valve works by rotating the ball 90 degrees using a lever or other actuator. When the bore is perpendicular to the flow, the valve is closed and the fluid is blocked from passing through. When the bore is in line with the inlet and outlet, the valve is open and the fluid can flow freely.

Check Valve

Check valve is a type of valve that allows fluid to flow in only one direction. It operates automatically and does not require any external control or manipulation. Check valves are also known as non-return valves or one-way valves. The primary function of a check valve is to prevent backflow, which is the flow of fluid in the opposite direction of its intended direction. Backflow can be harmful in many situations, such as in a water supply system, where contaminated water can enter the clean water supply if there is backflow.

Globe Valve

A globe valve is a type of valve used in a variety of industrial applications to control the flow of fluids such as water, oil, gas, and steam. It is named for its spherical shape and is designed to regulate fluid flow by controlling the position of a movable disk (or plug) inside the valve body, which partially or completely blocks the flow path. Globe valves are popular due to their versatility, durability, and ease of maintenance. They can be used for both on/off and throttling applications and can handle a wide range of pressures and temperatures. They are also relatively simple in design, making them easy to install and repair.

Gate Valve

A gate valve is a type of valve used to control the flow of a fluid or gas in a pipeline. It is named after the gate or wedge-shaped disc that is used to control the flow of the fluid. The gate is typically made of metal and is positioned perpendicular to the direction of flow. When the gate is in the fully open position, the fluid can flow freely through the valve. When the gate is in the fully closed position, the flow of fluid is completely stopped. Gate valves are often used in applications where a tight seal is required, as they are capable of completely stopping the flow of fluid.

Flat Disc Strainer

A flat disc strainer is a type of strainer used for filtering liquids or gases. It is usually made of stainless steel, and consists of a flat disc with small holes or perforations on its surface. The disc is designed to fit into a strainer housing or filter assembly, and the liquid or gas is forced through the perforations, which capture any solid particles or impurities that may be present.